2021-07-07

Facile preparation of super-oleophobic TiO2/SiO2 composite coatings by spraying method

Abstract： Re-entrant geometries can effectively trap air pockets, increase air/liquid interface fraction, prevent the penetration of low surface tension organic liquids, and achieve super-oleophobic performance. However, the creation of re-entrant geometries usually involving expensive lithographic tools, or complicated chemical procedures, and cannot be applied on a large scale, such super-oleophobic surfaces are unsuitable for practical application. Constructing hierarchical micro/nanostructure on substrates is a feasible solution to achieve super-oleophobicity through facile spraying method. Herein, we report a super-oleophobic TiO2/SiO2 composite coatings by taking advantage of an exceedingly simple spraying method. The dendritic structures produced by spraying the TiO2/ SiO2 mixture play the critical role in obtaining the re-entrant geometry required for oleophobic surface, and the introduction of micron-scale TiO2 particles and nano-scale SiO2 particles provide an enough dual-scale rough structure for the coating. The TiO2/SiO2 composite coatings exhibit superior repellence to high and low surface tension liquids as well long-term durability. This design strategy may provide useful guidelines for the fabrication of particle-based spray-coated super-oleophobic surfaces.

Yi Wu, et al. Facile preparation of super-oleophobic TiO2/SiO2 composite coatings by spraying method. Progress in Organic Coatings[J]. 2021, 159, 106411.